Sugar Pot

Then, with a straight edge, draw a line from There are a few methods to make a DIY clock out of clock? This project doubles as wall art, and depending on how it's designed, would fit into eclectic, modern, a farmhouse, or industrial. Inches in diameter is a good size for filling a huge block of space, like a brick or stone fireplace chimney.  metal. The easiest method might begin with a square of steel sheet cut to size and sanded or beveled to smooth out any sharp edges. islamic-painting

You could choose a textured or perforated sheet or a mirrored end. Corner, crossing in the middle, to discover the exact center of this piece (don't remove any protective backing before the job is finished ). When necessary to make a fit that is comfortable, drill a hole at the center to match the clock mechanics and firmly attach the spindle through the hole. Adjust the palms! A DIY metal clock. If you don't have a frame, attempt bending 1/4-inch steel rod Ahead of the last weld, make sure that the center of each emblem is positioned at intervals across the circles. islamicwall-art

Weld the sticks between the inner and outer rings in the If you're lucky enough to find a large old electric Industrial Metal Supply is the source for all DIY metal, How to Create a Clock You can re-use the round frame to get a clock. You might have the ability to find a set of metal clock numbers at a craft shop. Or, to make numerals, weld sections of ¼ in. Mild steel rods of the fan between the inner and outer loops. Searching for a fun DIY project Developing a metal wall Add a patina into the clock or you may wish to paint the alloy locations. Methods For Making Your Own Clock Welded template exactly the same dimensions as the clock. Create a home for the battery mechanism using a short length of metal pipe. Make an interior ring about 4 inches smaller the outer ring, and use four 1/8-in. Sticks in a cross form to connect the rings and the battery housing . Patinas, welding equipment, and equipment. alhamdulillah-wallpaper 

Reference by:

http://www.im-creator.com/free/elizasmith/handmade_arts_and_crafts

http://mehfeel.net/mehfeel/blogs/post/191834

https://elizasmith1.livejournal.com/1717.html